Contact Us Todayo: 405.288.0233f: 405.288.0238
Item ID
TH4B4222H
Description
LX Series Split System Heat Pump, 3.5 Ton, 14 SEER / 1-Stage, 8.2 HSPF, R-410A, 208-230V-1Ph-60Hz, Hard Start Kit Factory, Reciprocating Compressor, 3/8" OD Liquid Line, 7/8" OD Vapor Line
Manufacture
luxaire
Item Desc
LUXAIRE RES SPLT HP 14S 3.5T R410A W/HS
Charge Per Foot, Oz#
0.67
Coil - Face Area Sq# Ft#
23.82
Coil - Fins / Inch
18
Coil - Rows Deep
2
Compressor Amps - Locked Rotor
88
Compressor Amps - Rated Load
19.4
Compressor Type
Reciprocating
Depth
31-3/4"
Factory Option
Hard Start Kit
Fan Diameter Inches
24
Fan Motor - Nominal CFM
3715
Fan Motor - Nominal RPM
850
Fan Motor - Rated HP
1/4
Fan Motor - Rated Load Amps
1.3
Generation
1st Gen
HSPF
8.2
Length
39-1/2"
Liquid Line Set OD
3/8
Max# Overcurrent Device Amps
40
Min# Overcurrent Device Amps
30
Minimum Circuit Ampacity
25.5
Nominal Capacity
3.5 Ton
Nominal Series Efficiency And Staging
14 SEER / 1-Stage
Normal Voltage Range
187 to 252
Operating Weight Lbs#
230
Product Type
Heat Pump
Refrigerant
R-410A
Sound Power Ratings dBA - Cooling
75
Sound Power Ratings dBA - Heating
75
Unit Charge (Lbs# - Oz#)
12 - 7
Vapor Line Set OD
7/8
Mfg Part Number
TH4B4221H
• Easier Installation - Independent panels provide quick access for unit setup. Installation time is reduced by easy power and control wiring access. Options are provided for TXV. The factory installed filter-drier and factory charge for a 15-Ft lineset means less time spent brazing and charging the system. The small base dimension and reduced unit size make for easier retrofits. • Accessible Information - QR code on unit provides quick access to technical documents and warranty information. • Durable Finish - The coated steel wire fan guard, coated external fasteners, and pre-treated G90-equivalent galvanized steel chassis components resist corrosion and rust creep. Titanium colored powdercoat paint further protects external panels. • Rugged Coil Protection - Coils are protected from mechanical damage by a proven stamped steel coil guard design. • Quality Coils - Enhanced aluminum fins are mechanically bonded to copper tubing. • Protected Compressor - Compressors are protected internally by a high pressure relief valve and a temperature sensor, and externally by the system high and low pressure switches. The liquid line filter-drier is factory installed to protect the compressor against moisture and debris. • Reliable Operation - Ball bearing fan motors provide superior performance in extreme temperatures. Factory installed accumulator ensures proper functioning across a wide range of conditions. • Environmentally Friendly - CFC-free R-410A refrigerant delivers environmentally friendly performance with zero ozone depletion. • Top Discharge - Air is blown up, away from the structure and any landscaping and allows compact location on multiunit applications. • Low Operating Sound Levels - Developed using CFD and FEA tools, the sturdy cabinet and top design provides sound performance of 75 dBA or lower. Compatible accessories for further sound reduction are also available. • Better Service Access - Diagonal base valves with open access for low-loss fittings, single panel access to the electrical controls, full corner access, and removable fan guard allow easy access for unit maintenance. • Agency Listed - Safety certified by CSA to UL 1995 / CSA 22.2. Performance certified to ANSI/AHRI Standard 210/240 in accordance with the Unitary Small Equipment certification program.