A “roller-bearing” pipe support used to support roof mounted gas
pipes, electrical conduit, solar piping and other mechanical piping. Unique design absorbs thermal expansion and contraction of pipes thus preventing
damage to the roof membrane. Pipes rest on a polycarbonate resin roller and a polycarbonate axle situated in a MIRON TPC or polycarbonate resin base.
Each pipestand will accommodate up to 3-3/4" outside diameter pipes. For 3? ID and smaller pipes. 2.15? clearance height. Performance: The
polycarbonate roller serves to keep the pipestand system directly beneath the pipe without binding. It also allows for some lateral expansion of the
pipe system. Guide holes are provided at the top of the cradle for any desired installation of a MIRO Pipe Strap using #8 x 1/2" screws to prevent
separation of the pipe from the support. The base is gently rounded to prevent gouging the roof membrane. Compatibility: Pillow Block Pipestands are
recommended and are compatible for use with all current types of decking and with all commonly used built-up and single-ply roofing membranes where
roof-mounted pipes occur. Load Weight: Maximum load weight may not exceed 79 lbs. per pipestand. Composition and Materials: A one-piece roof deck
base, a roller housing support composed of rigid polycarbonate resin with carbon black added for UV resistance and protection, and a roller made of
polycarbonate resin which rests on a MIRON TPC or polycarbonate axle of 9/16" diameter. Size: The Pillow Block Pipestand Model 3-R-2 have a deck base
of 7.75" square, the top of the cradle is 4" high, and the maximum width of the interior of the cradle is 3.875". Rod and pipes supported on the
3-R-2 pipestand will have a clearance of 2-1/8". Model 3-R spacers can be stacked 2 or 3 high to give greater height to the pipe or conduit. Each 3-R
spacer increases the clearance of the pipe by 2".