The damper shall be powered directly from zone panel 24 VAC damper
terminals. A shared common terminal along with power open and power closed terminals shall be provided for damper control. In the event of a power
failure, no readjustment shall be required. The PO/PC Damper shall have an inlet end and a crimped fitment on the outlet end to accept mating duct
work of the same diameter. The damper shall be constructed of rolled steel with precision bushings and stiffening ribs to increase damper rigidity. A
damper position indicator shall be included to display the current damper positioning. The drive motor shall require 3 VA of power at 24 VAC. •
Suitable for light commercial and residential installation • Designed for years of trouble free operation • Fully compatible with other Braeburn
zoning system components